![]() ![]() This way you’ll have a sort of frame for the window. Draw a rectangle about one inch from the edge. If you don’t want to make it bigger, you can just cut off the flaps. Then tape the flaps from the front to extend the depth of your light box. Once you have it, tape the bottom flaps to give it stability and make sure that there won’t be any light coming in from the cracks. If you can’t get your hands on a used one, you can buy them at packaging and shipping supply stores or some home improvement retailers. This can be easy to find for free, whether it’s because you received a parcel recently, or by asking your local supermarket if you can take home one they’ve discarded. Now that you have all the materials ready, let’s make a light box out of them! Step 1: Tape the flapsįind a cardboard box in the desired size. Related: 32 Homemade DIY photography props.You can decide if you want to use speedlights, LED lights, desk lamps, etc. Lights – These are not needed to make the light box, but you do need them to use it. If you don’t have any, you can use the tape. You can also use a spray adhesive or glue stick, though tape is generally easier.Ĭlamps (optional) – Always useful to position and fix backdrops without damaging the light box. Tape – This can be of any kind: scotch tape, duct tape, packing tape, masking tape, etc. This is especially true because reflecting materials will show any defects. Ruler (optional) – The cuts don’t need to be extremely precise, but it’s always better to do things with care if you want a good result. It will be used to cut the cardboard box used for the light box. Just make sure it’s not shiny or else you’ll have many unwanted and unflattering reflections.Ĭolored paper (optional) – Different colored paper, poster board, or fabric will give you more versatility in your photographs as not all product photography needs to be on a white background.Ĭutter – This can be any kind of utility knife or Exacto knife. ![]() White poster board – A roll of paper, a poster board, or a piece of white fabric will serve as a backdrop. Wax paper – This can be substituted by parchment paper or tracing paper. This is entirely up to you, depending on the size of light box you require. For jewellery, you can use a pretty small box, while photographing wine bottles will require a bigger one. If you want to build a DIY light box to improve your product photography, here’s a list of what you’ll need:Ĭardboard box – The size depends on the kind of products you’ll want to photograph. Materials Required to Make a DIY Light Box ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |